V8 Function List-Front End

Introduction

The front-end V8 engine code and the server-side V8 programming language are both Javascript syntax.
Front-end V8 engine supports full ES6 syntax
The front-end V8 engine integrates many functions to directly call the back-end interface through http, which has the same effect as V8.Post() writing the corresponding interface address
The front-end V8 engine code is executed at the front-end. If the server-end low-code platform general addition, deletion, modification and query interface is directly called, the front-end V8 event will not be executed (the server-end V8 event will be executed)
Front-end V8 functions are mainly used for front-end V8 events of form attributes, module engine V8 button codes, etc.

V8.Form

Access current form field values

var id = V8.Form.Id;//在新增数据时也能访问到，因为id是提前后成，以备可能有子表要使用
var name = V8.Form.UserName;
//如果是下拉框组件，则获取到的是object，可访问到数据源中的所有字段
var selectId = V8.Form.SelectUser.Id;

V8.OldForm

access the field value before the current form is modified

var oldName = V8.OldForm.UserName;

V8.FormSet

assigns a value to the current form field and triggers the value change event of the assigned field
Use V8.Form.UserName = 'Zhang San'; The value change event of the UserName field will not be triggered
It is strongly not recommended to use FormSet to assign values to this field again in the value change event of the field, otherwise it may be endless. At this time, V8.Form.UserName = 'Zhang San' must be used. This method of assignment.

//给文本框赋值
V8.FormSet('UserName', '张三');
//给下拉框赋值（其中Id和Name就是下拉框组件中字段属性配置的存储字段与显示字段名称）
V8.FormSet('UserName', { Id : 1, Name : '张三' });

V8.Field

Access the current form field properties

var isReadonly = V8.Form.UserName.Readonly;//UserName字段当前是否是只读
//包含属性：Name、Label、Config、Data(绑定数据源)、Readonly、Visible、Placeholder等等

V8.FieldSet

assigns a value to the current form field property

//设置UserName字段为只读
V8.FieldSet('UserName', 'Readonly', false);
//给某个下拉框动态设置数据源：
V8.FieldSet('字段名', 'Data', [{Id:1}, {Id:2}]);

V8.FormMode

Get the mode of the current Form opening, possible values: Add (new), Edit (edit), View (preview)

if(V8.FormMode == 'Add'){
  V8.FormSet('ShenqingR', V8.CurrentUser.Name);//默认申请人名称
  V8.FormSet('ShenqingRID', V8.CurrentUser.Id);//默认申请人Id
  V8.FormSet('Bumen', V8.CurrentUser.DeptName);//默认申请人部门名称
}

V8.FormSubmitAction

Form submission type, possible values: Insert, Update, Delete

The value cannot be accessed in the form entry event, and can only be accessed before and after the form is submitted.
in the form entry event to determine whether the current form is new or edited, please use V8.FormMode (possible values: Add (new), Edit (edit), View (preview))

V8.FormOutAction

Get the type of leaving the form, which can be used as a judgment in V8 engine code after leaving the form and submitting the form. Possible values: Update, Insert, Close, Delete

V8.FormOutAfterAction

Get the type after leaving the form, which can be used to leave the form/submit the V8 engine code after the form, possible values: Insert, Update, View, Close

V8.LoadMode

The loading mode of the current Form is either empty or the value is Design(string, design mode). Pay special attention to some events. If V8.FieldSet is used to change the field properties, it is necessary to judge that V8.LoadMode = = 'Design' will not be executed, otherwise the field properties will be saved persistently after the form design is saved.

V8.KeyCode

Keyboard V8 event can get the code value of the keyboard, such as the Enter key corresponding to 13

javascript

if(V8.KeyCode == 13){
    V8.Tips('您已经按了Enter键！');
}
//常见KeyCode对照表
8‌：Backspace（退格键） ‌
‌9‌：Tab（表格键） ‌
‌12‌：Clear（清除键） ‌
‌13‌：Enter（回车键） ‌
‌16‌：Shift_L（左Shift） ‌
‌17‌：Control_L（左Control） ‌
‌18‌：Alt_L（左Alt） ‌
‌20‌：Caps_Lock（大小写锁定） ‌
‌27‌：Escape（Esc键） ‌
‌32‌：Space（空格键） ‌
‌46‌：Delete（删除键） ‌
‌37‌：Left（左） ‌
‌38‌：Up（上） ‌
‌39‌：Right（右） ‌
‌40‌：Down（下） ‌

V8.TableId, V8.TableName

Obtain the ID and Name of the current DIY table

V8.EventName

The name of the front-end V8 event, which is relatively easy to use in the global V8 engine code, and the possible value

FormTemplateEngine：表单模板引擎
TableTemplateEngine：表格模板引擎
OpenTableBefore：弹出表格前事件
OpenTableSubmit：弹出表格提交事件
FieldOnKeyup：文本框键盘事件
FormOut：离开表单事件（指表单提交后）
FormSubmitBefore：表单提交前事件
FormIn：进入表单事件
FieldValueChange：字段值变更事件
BtnFormDetailRun：详情按钮V8按钮
V8BtnLimit：V8按钮是否显示事件
V8BtnRun：V8按钮执行事件
TableRowClick：表格行点击V8事件
PageTab：多Tab页签V8事件
WFNodeEnd：流程节点结束V8事件
WFNodeStart：流程节点开始V8事件

V8.CurrentToken

Current login identity token

V8.TableModel

Obtain the object of the current table, which contains table information such as Id and Name.

V8.ThisValue

Access the value object selected by the drop-down box, such as V8.ThisValue.Id

V8.Tips

pop-up message prompt in the lower right corner

V8.Tips(msgContent, true/false, time)
//msgContent为消息内容
//true为成功消息（1秒后消失），false为错误消息（5秒后消失）
//time可传入提示框多少秒后消失

V8.CurrentUser

Access current login user information

var id = V8.CurrentUser.Id;

V8.Post

note that the post of the back-end V8 is V8.Http.Post(), which is currently written inconsistently and will be unified later.

javascript

//发起ajax请求，常规用法，自带token，默认Form Data参数格式（非Request Payload）
V8.Post('api url', { Id : 1 }, function(result){
    if(result.Code == 1){ ... }
})
//完整用法
V8.Post({
  url : '',//接口地址，必传。
  data : {}, //接口参数
  dataType : 'json', //默认空（Form Data），可选json（Request Payload）
  header : {}, //可选参数
  success : function(result){ }, //请求成功的回调函数，常用参数。
  fail : function(result){ }, //请求失败的回调函数，如接口报错404、500，可选参数，也可传入error，与fail一致。
});

V8.Get

Initiate an ajax request

V8.Get('api url', {}, function(result){})

V8.ChineseToPinyan

Chinese to Pinyin, V8.ChineseToPinyin(chinese, fullPyLen, type)

//fullPyLen: 前几个字转换为全拼音
//type : 1：驼峰（默认），2：全大写，3：全小写
var pinyin = V8.ChineseToPinyin('你好吾码', 2, 1);//结果：NihaoWM

V8.RefreshTable({ _PageIndex : 1 })

Refresh the table data list,_PageIndex -1 to jump to the last page.
Generally used for more buttons on pages, more buttons on rows, etc. to refresh the current table.
Note that unlike [V8.TableRefresh], it refreshes the sub-table in the current main form (function naming will be optimized in the future).

V8.Router.Push

Page jump, can be performed on the V8 button

V8.Router.Push(`/notice`)

V8.Window.Open

Open a new page like:

V8.Window.Open(`https://microi.net`)

V8.OpenForm(formModel, type)

Open the form, type:'View'/'Edit'/'Add', as in the [Row More V8 button] event:

V8.OpenForm(V8.Form, 'Edit')

V8.OpenFormWF(formModel, type)

Open the form with process information. (Currently the last process to get this data)

V8.SelectedData

Get an array of selected rows, each row containing all the data

//批量删除数据
var selectData = V8.SelectedData;
if(selectData.length == 0){
  V8.Tips('请选择要删除的数据！', false);
  return;
}
V8.ConfirmTips(`确认批量删除选中的[${selectData.length}]条数据？`, async function(){
  var ids = selectData.map(item => { return item.Id });
  var result = await V8.FormEngine.DelFormData('diy_order', {
    Ids : ids
  });
  if(result.Code != 1){
    V8.Tips('删除失败：' + result.Msg, false);
    return;
  }
  V8.Tips('删除成功！');
  V8.RefreshTable({ _PageIndex : 1 })
});

V8.SearchSet

Table Tabs Settings Search Criteria

V8.SearchSet([
  ['Age', '>=', 18],
  ['Age', '<', 50]
]);

V8.SearchAppend

Table Tabs Append Search Criteria

V8.SearchAppend([
  ['Age', '>=', 18],
  ['Age', '<', 50]
]);

V8.AppendSearchChildTable [V8.OpenTableSetWhere is recommended]]

Specify search criteria for the table in [V8 event code before pop-up] of the pop-up table

V8.AppendSearchChildTable(V8.Field.XuanzeGLSP, { ShangpinLXZ: '1'});

V8.OpenTableSetWhere

Specify search criteria for the table in [V8 event code before pop-up] of the pop-up table

V8.OpenTableSetWhere(V8.Field.XuanzeGLSP, [
  ['ShangpinMC', 'Like', '商用直饮机']
]);

V8.IsNull(value)

Determine whether a value is empty
returns true if the value is null, undefined, ''(empty string), 'null'(null string), or 'undefined'(undefined string)

Parent table on child table

javascript

V8.TableSearchAppend(V8.Field.子表Name, {FiedlName : value, FieldName2 : value})

V8.TableSearchSet(V8.Field.子表Name, {FiedlName : value, FieldName2 : value})

V8.TableRefresh(V8.Field.子表Name, { _PageIndex : -1 })
_PageIndex传入-1表示跳转到最后一页。（注意与【V8.RefreshTable】不同的是它一般是用于模块引擎中行更多按钮、页面更多按钮刷新当前表格，将来会优化函数命名）。

V8.FormSubmit

Submit the form, note: this function will trigger前端表单提交前V8事件and therefore cannot be前端表单提交前V8事件Call this function, otherwise it will loop.

V8.FormSubmit({
  CloseForm: true,  //是否关闭Form表单
  SavedType:'Insert', //保存表单后的操作Insert/Update/View
  Callback : function //回调函数
});

V8.FormClose

Forcibly close the form

V8.FormClose();

V8.ParentV8

Access the V8 object of the parent table in the child table, and can use all the functions of the V8 object of the parent table

var parentForm = V8.ParentV8.Form;//访问父级表单所有字段
V8.ParentV8.FormSet('字段名', '值');

V8.AddSysLog

Add Log

V8.AddSysLog({
  Title : '库存同步', 
  Type : 'SyncStock', 
  Content : '张三调用了库存同步接口，同步后库存为100。'
})

V8.ReloadForm

Reload the current form

V8.ReloadForm({ Id : 'xxxx-xxxx-xxxx'}, 'Edit/View' );//以编辑或预览模式重新加载当前表单

V8.HideFormBtn

Hide edit, delete, add buttons

V8.HideFormBtn('Update');
V8.HideFormBtn('Delete');
V8.HideFormBtn('Save');

V8.HideFormTab(tabName)

Hide a form Tab tab

V8.HideFormTab('tabName（在表单属性中配置的Tab名称）')

V8.ShowFormTab(tabName)

Show a form Tab tab

V8.HideFormTab('tabName（在表单属性中配置的Tab名称）')

V8.ClickFormTab(tabName)

Select a form Tab tab

V8.GetFormTabs

Get all tab pages of the form.

V8.ConfirmTips

Confirm prompt box

javascript

例：V8.ConfirmTips('确认审批？', okCallback, cancelCallback, option)。 
//option为可选参数，可配置：{Title:'',OkText:'',CancelText:'',Icon:''}

V8.ShowTableChildHideField

Force the hidden fields of the child table to be displayed and refresh the child table.

V8.ShowTableChildHideField('子表fieldName',['fieldName','fieldName']);
V8.RefreshChildTable(fieldModel, V8.Row);//刷新子表
V8.RefreshChildTable(V8.Field.子表列名, V8.Row);//第二个参数可传入parentFormModel。

V8.GetChildTableData

var data = V8.GetChildTableData('子表字段名称');

V8.CurrentTableData

Get the data of the current table page

V8.WF.StartWork

Initiation process

javascript

V8.WF.StartWork({        
    FlowDesignId:'',//流程图Id，必传        
    FormData:JSON.stringify({}),//可选，也可以传入{} object类型，内部会自动序列化        
    TableRowId:'',//关联的数据Id，必传        
    NoticeFields:JSON.stringify([]),//通知数据，可选，格式：[{Id:'字段Id',Name:'字段名',Label:'字段名称',Value:'值'}]，如果是数组类型，内部会自动序列化        
    //还可以传入选择的下一步审批人、添加的审批人、审批意见 等等    
}, function(result){//这是回调函数处理，result返回了Receivers、ToNodeName等
  if(result.Code == 1){
    V8.Tips('发起流程成功！');
  }
});

V8.SendSystemMessage

Send system message, message reminder

//消息内容
var msgContent = '测试v8发送系统消息！' + new Date().toString();

//内容增加路由跳转
msgContent += '<a href="/#/microi-upt-log?Keyword=v3.5.27&Tab=测试Tab3">测试页面跳转</a>';

//发送系统消息
V8.SendSystemMessage({
	Content: msgContent,
  	ToUserId: 'c74d669c-a3d4-11e5-b60d-b870f43edd03',//admin  //'c19e70d1-b7b3-4eaa-933d-e8f59c85562f' anderson
}, function(result){
	V8.Tips(JSON.stringify(result), true, 20);
});

//后端接口引擎可以这样使用：
return V8.Http.Post({
  Url : V8.SysConfig.ApiBase + '/api/DiyChat/SendSystemMessage',
  PostParam : {
    Content : `测试接口引擎通过https发送系统消息！<a href="/#/microi-upt-log?Keyword=v3.5.27&Tab=测试Tab3">测试页面跳转</a> 发送时间：${V8.Action.GetDateTimeNow()}`,
    ToUserId: 'c74d669c-a3d4-11e5-b60d-b870f43edd03'//给admin帐号发送一条消息
  },
  Headers : {
    authorization : 'Bearer ' + V8.Method.GetCurrentToken().Token
  }
});

V8.FormWF

access whether the form with the process interface is currently open, and return the value:

{
    IsWF:true/false, //是否打开了带流程界面的表单
    WorkType:'',//StartWork、ViewWork
    FlowDesignId:'流程图Id'
}

V8.Base64

Base64 encryption and decryption

V8.Base64.endcode('待加密字符串');//加密
V8.Base64.dedcode('待解密字符串');//解密
V8.Base64.isValid('已加密字符串');//判断是否是已加密的base64格式

V8.OpenDialog

Open a custom component dialog

javascript

V8.OpenDialog({    
    ComponentName:'NodeColConfig',//必传，其余参数可选。组件名称，二次开发必须提前预注册。    
    Title: '测试定制组件标题',    
    OpenType:'',//可传：Drawer    
    TitleIcon: 'fas fa-plus',//标题左侧的图标   
    Width: '70%',   
    DataAppend:{//传入自定义附加数据，DataAppend为固定参数名称        
        Abc:123,        
        Name:'张三'    
    }
});
//在定制组件内props接收V8对象：
props: {    
    DataAppend:{        
        type: Object,        
        default: () => {}    
    }},
    mounted() {    
        //this.DataAppend.V8包含了绝大部分可使用的V8内置函数，可以使用V8事件一样的写法。    
        //获取已打开的表单中（或已选中的一条表格数据）的Title字段值。    
        var title = this.DataAppend.V8.Form.Title;    
        //访问传过来的自定义数据    
        var name = this.DataAppend.Name;//张三    
        //刷新diy表格    
        this.DataAppend.V8.RefreshTable();    
        //关闭当前对话框    
        this.DataAppend.V8.CloseThisDialog();
    }

Universal open iframe

V8.OpenDialog({    
    ComponentName:'OpenIframe',//必传，其余参数可选。组件名称，二次开发必须提前预注册。    
    Title: '打印',    
    OpenType:'Drawer',//可传：Drawer    
    TitleIcon: 'fas fa-plus',//标题左侧的图标   
    Width: '800px',   
    DataAppend:{//传入自定义附加数据，DataAppend为固定参数名称
        Url:'/autoprint/#/doprint',        
        PrintId:'27833304-caeb-4665-b722-808fd3663bb1',
        DataApi: `${V8.SysConfig.ApiBase}/apiengine/print_xm?OsClient=${V8.SysConfig.OsClient}&Id=${ids}`
    }
});

V8.NewGuid

Generate a front-end Guid value

var newGuid = V8.NewGuid();

await V8.NewServerGuid

Generate a server-side Guid value

var newGuid = await V8.NewServerGuid();

V8._

Access to underscore objects, commonly used js utility libraries

//underscore用法见：https://underscorejs.org/   https://underscorejs.net/ 
V8._.where(...)

V8.ModuleEngine

Module engine related

V8.ApiEngine

Interface Engine

javascript

//调用方式：
var result = await V8.ApiEngine.Run('ApiEngineKey', { 
    Param1 : '1',
});

V8.DataSourceEngine

Data Source Engine

V8.OpenAnyForm

Open an arbitrary form

javascript

V8.OpenAnyForm({
  TableName: "Diy_ShouhouDD", //必传。打开哪张表。
  FormMode: "Edit", //必传。打开的模式：Add、Edit、View
  Id: V8.Form.Id, //当FormMode为Edit、View时，必传Id。
  DialogType: "Dialog", //可选。打开的方式，不传则默认为表单属性设置的打开方式。
  SelectFields: ["ZhipaiXX", "ShouhouRY"], //可选。只查询、显示哪些字段。不传则默认显示。
  Width: "765px", //可选。弹出层的宽度。不传则默认为表单属性设置的弹出宽度。
  DataAppend: {
    //传入自定义附加数据，DataAppend为固定参数名称。可在指定的打开表单V8事件中使用V8.DataAppend访问。
    Abc: 123,
    Name: "张三",
  },
  //替换掉提交事件。可选。
  EventReplace: {
    //这3个参数一定会接收到，必须执行callback(DosResult)
    Submit: async function (v8, param, callback) {
      //调用指派接口
      var result = await V8.ApiEngine.Run('shouhoudd_zhipai',{
        Id: v8.Form.Id,
        ShouhouRY: V8.Form.ShouhouRY,
      });
      callback(result);
	  V8.RefreshTable({ PageIndex: 1 });
    },
  },
});

V8.OpenAnyTable

Open an arbitrary list

javascript

V8.OpenAnyTable({   
  SysMenuId: "69a9c7a9-7130-414e-a4f8-9f3690075d22", //SysMenuId、ModuleEngineKey必传一个，打开哪个菜单。   
  //ModuleEngineKey: "modelKey",
  MultipleSelect: true, // 是否多选   
  PropsWhere : [
    ['FkId', '=', V8.Form.Id]
  ],//查询条件
  ShowLeftSelectionList: true, //左侧选中列表是否显示，选true时下面这5条信息配置可用
  ShowPrefix: true, //是否显示前缀
  ShowTitleName: 'PeijianBH', //主标题
  ShowSubTitleList: ['PeijianMC'], //副标题
  ShowPageSize: 10, //显示条数
  NoPullDown: false, //是否禁用下拉
  SubmitEvent : async function (selectData,callback){//提交事件    
    var addList = [];
    if (selectData.length == 0) {
      V8.Tips('请选择数据');
      V8.Result = false;
    } else {
		//调用指派接口
      var result = await V8.ApiEngine.Run('ApiKeyName', {
        Name: V8.Form.Name,
      })
	  callback(result);
      V8.RefreshTable({ PageIndex: 1 });
    }
  }
})

Form button anti-duplicate click

V8.FieldSet('YijianSCFBMX', 'Config.Button.Loading', true); 
var result = await V8.ApiEngine.Run('ApiKeyName', {});
V8.FieldSet('YijianSCFBMX', 'Config.Button.Loading', false);

V8.ClientType

Access the current client type

//可能的值：PC、IOS、Android、H5、WeChat
var clientType = V8.ClientType;

V8.SysConfig

Access system setup information

//可以访问到系统设置sys_config表的任意字段
var sysTitle = V8.SysConfig.SysTitle;

V8.FormEngine

See platform documentation:FormEngine usage

Mobile End Function

Bluetooth Printing

//单条打印
if(V8.ClientType == 'PC'){
    var ids = JSON.stringify([V8.Form.Id]);
    var Dydz = 'f606ae5e-1ada-45d0-971c-53533b70a461';
    V8.OpenDialog({    
        ComponentName:'OpenIframe',//必传，其余参数可选。组件名称，二次开发必须提前预注册。    
        Title: '打印',    
        OpenType:'Drawer',//可传：Drawer    
        TitleIcon: 'fas fa-plus',//标题左侧的图标   
        Width: '800px',   
        DataAppend:{//传入自定义附加数据，DataAppend为固定参数名称
            Url:'/autoprint/#/doprint',        
            PrintId:Dydz,
            DataApi: `${V8.SysConfig.ApiBase}/apiengine/print_bgxm?0sClient=${V8.SysConfig.OsClient}&Id=${ids}`
        }
    });
}else{
    console.log('Microi：移动端蓝牙打印准备开始！');
    //如果没有连接，则打开蓝牙连接页面
    if(!V8.Print || !V8.Print.BLEInformation || !V8.Print.BLEInformation.deviceId){
        console.log('Microi：移动端准备蓝牙连接！');
        V8.Print.OpenBluetoothPage();
        console.log('Microi：移动端已打开蓝牙连接页面！');
    }else{//如果已连接，直接开始打印
        console.log('Microi：移动端准备开始打印！');
        var command = V8.Print.createNew();
        command.setSize(75, 65);//设置页面大小，单位mm
        command.setGap(2);//传感器
        command.setCls();//清除打印机缓存
        command.setText(0, 30, "TSS24.BF2", 1, 1, "图片");//打印文字
        command.setQR(40, 120, "L", 5, "A", "www.baidu.com佳博");//打印二维码
        command.setText(60, 90, "TSS24.BF2", 1, 1, "佳博");//打印文字
        command.setText(170, 50, "TSS24.BF2", 1, 1, "小程序测试");//打印文字
        command.setText(170, 90, "TSS24.BF2", 1, 1, "测试数字12345678");//打印文字
        command.setText(170, 120, "TSS24.BF2", 1, 1, "测试英文abcdefg");//打印文字
        command.setText(170, 150, "TSS24.BF2", 1, 1, "测试符号/*-+!@#$");//打印文字
        command.setBarCode(170, 180, "EAN8", 64, 1, 3, 3, "1234567");//打印条形码
        command.setPagePrint();//打印页面
        V8.Print.prepareSend(command.getData());//准备发送，根据每次发送字节数来处理分包数量
        console.log('Microi：移动端打印结束！');
    }
}

//批量打印
if (V8.ClientType == 'PC') {
    var ids = JSON.stringify([V8.Form.Id]);
    var Dydz = '38fa78e7-a5c6-4311-8e5d-2879e7e4b45a';
    V8.OpenDialog({
        ComponentName: 'OpenIframe', //必传，其余参数可选。组件名称，二次开发必须提前预注册。    
        Title: '打印',
        OpenType: 'Drawer', //可传：Drawer    
        TitleIcon: 'fas fa-plus', //标题左侧的图标   
        Width: '800px',
        DataAppend: { //传入自定义附加数据，DataAppend为固定参数名称
            Url: '/autoprint/#/doprint',
            PrintId: Dydz,
            // DataApi: `${V8.SysConfig.ApiBase}/apiengine/print_bgxm?0sClient=${V8.SysConfig.OsClient}&Id=${ids}`
            DataApi: 'https://api.chongstech.com/apiengine/print_bgxm?OsClient=qiqiang&Id=' + ids
        }
    });
} else {
    //2025-01-04 Anderson：实现批量打印
    //如果没有连接，则打开蓝牙连接页面
    if(!V8.Print || !V8.Print.BLEInformation || !V8.Print.BLEInformation.deviceId){
        console.log('Microi：移动端准备蓝牙连接！');
        V8.Print.OpenBluetoothPage();
        console.log('Microi：移动端已打开蓝牙连接页面！');
    }else{
        var bgdId = V8.Form.DangqianBGDID;
        var resXMlist = await V8.FormEngine.GetTableData('diy_kjbgxm', {
            _Where: [
                ['DangqianBGDID', '=', bgdId]
            ],
            _SelectFields: [
                'Xiangma', // 箱码（二维码内容）
                'Cunhuo', // 物料代码
                'CreateTime', // 生产日期
                'ShengchanPH', // 批次
                'ZhuangxiangSL', // 数量
                'GuigeXH' // 图号
            ]
        });
        if (resXMlist.Code != 1) {
            V8.Tips(resXMlist.Msg, false);
            return;
        }
        var dataXMList = resXMlist.Data;
        //2025-01-04 Anderson：for循环太快，改为3秒执行一次
        var index = 0;
        console.log(`Microi：移动端准备批量打印：共[${dataXMList.length}]条！`);
        V8.Tips(`移动端准备批量打印：共[${dataXMList.length}]条！`);
        if(dataXMList.length >= 100){
            V8.Tips(`条数【${dataXMList.length }】过多！`, false);
            return;
        }
        function forPrint(row){
            if(index >= dataXMList.length){
                console.log(`Microi：移动端批量打印结束！`);
                V8.Tips(`移动端批量打印结束！`);
                return;
            }
            console.log(`Microi：移动端开始批量打印：第[${index + 1}]条！`);
            V8.Tips(`移动端开始批量打印：第[${index}]条！`);
            //--打印内容
            {
                var cmd = V8.Print.createNew();
                cmd.setSize(75, 65);
                cmd.setGap(2);
                cmd.setCls();
                /* 标题 */
                cmd.setText(220, 10, "TSS24.BF2", 1, 1, "【试运行】产品标识卡");
                /* 左侧字段 */
                cmd.setText(10, 60, "TSS24.BF2", 1, 1, "物料代码");
                cmd.setText(10, 100, "TSS24.BF2", 1, 1, "物料名称");
                cmd.setText(10, 140, "TSS24.BF2", 1, 1, "生产日期");
                cmd.setText(10, 180, "TSS24.BF2", 1, 1, "批次");
                cmd.setText(10, 220, "TSS24.BF2", 1, 1, "数量");
                cmd.setText(10, 260, "TSS24.BF2", 1, 1, "图号");
                /* 右侧数据：用当前行数据 */
                cmd.setText(180, 60, "TSS24.BF2", 1, 1, row.Cunhuo || '');
                cmd.setText(180, 100, "TSS24.BF2", 1, 1, row.Cunhuo || ''); // 物料名称如不同字段再改
                cmd.setText(180, 140, "TSS24.BF2", 1, 1, row.CreateTime || '');
                cmd.setText(180, 180, "TSS24.BF2", 1, 1, row.ShengchanPH || '');
                cmd.setText(180, 220, "TSS24.BF2", 1, 1, row.ZhuangxiangSL || '');
                cmd.setText(180, 260, "TSS24.BF2", 1, 1, row.GuigeXH || '');
                /* 右侧二维码：当前箱码 */
                cmd.setQR(420, 300, "L", 5, "A", row.Xiangma || '');
                cmd.setPagePrint();
                /* 3. 一次性发送 */
                V8.Print.prepareSend(cmd.getData());
            }
            index++;
            setTimeout(function(){
                forPrint(dataXMList[index])
            }, 3000);
        }
        forPrint(dataXMList[0]);
        /* 2. 拼打印数据 */
        // for (var i = 0; i < dataXMList.length; i++) {
        //     var row = dataXMList[i];
        // }
    }
}

Two-dimensional code, bar code scan code V8.Method?. ScanCode

Support H5, applets, APP

if (V8.Method?.ScanCode) {
  await V8.Method?.ScanCode();//同步等待扫码成功
  if(V8.ScanCodeRes){//获取到的扫码值
    V8.FormSet('SaomaValue', V8.ScanCodeRes);//赋值
  }else{
    V8.Tips('扫码结束，未扫到值！', false)
  }
}else{
  V8.Tips('非移动端环境，暂不支持扫码！', false)
}

V8 Function List-Front End ​

Introduction ​

V8.Form ​

V8.OldForm ​

V8.FormSet ​

V8.Field ​

V8.FieldSet ​

V8.FormMode ​

V8.FormSubmitAction ​

V8.FormOutAction ​

V8.FormOutAfterAction ​

V8.LoadMode ​

V8.KeyCode ​

V8.TableId, V8.TableName ​

V8.EventName ​

V8.CurrentToken ​

V8.TableModel ​

V8.ThisValue ​

V8.Tips ​

V8.CurrentUser ​

V8.Post ​

V8.Get ​

V8.ChineseToPinyan ​

V8.RefreshTable({ _PageIndex : 1 }) ​

V8.Router.Push ​

V8.Window.Open ​

V8.OpenForm(formModel, type) ​

V8.OpenFormWF(formModel, type) ​

V8.SelectedData ​

V8.SearchSet ​

V8.SearchAppend ​

V8.AppendSearchChildTable [V8.OpenTableSetWhere is recommended]] ​

V8.OpenTableSetWhere ​

V8.IsNull(value) ​

Parent table on child table ​

V8.FormSubmit ​

V8.FormClose ​

V8.ParentV8 ​

V8.AddSysLog ​

V8.ReloadForm ​

V8.HideFormBtn ​

V8.HideFormTab(tabName) ​

V8.ShowFormTab(tabName) ​

V8.ClickFormTab(tabName) ​

V8.GetFormTabs ​

V8.ConfirmTips ​

V8.ShowTableChildHideField ​

V8.GetChildTableData ​

V8.CurrentTableData ​

V8.WF.StartWork ​

V8.SendSystemMessage ​

V8.FormWF ​

V8.Base64 ​

V8.OpenDialog ​

V8.NewGuid ​

await V8.NewServerGuid ​

V8._ ​

V8.ModuleEngine ​

V8.ApiEngine ​

V8.DataSourceEngine ​

V8.OpenAnyForm ​

V8.OpenAnyTable ​

Form button anti-duplicate click ​

V8.ClientType ​

V8.SysConfig ​

V8.FormEngine ​

Mobile End Function ​

Bluetooth Printing ​

Two-dimensional code, bar code scan code V8.Method?. ScanCode ​

V8 Function List-Front End

Introduction

V8.Form

V8.OldForm

V8.FormSet

V8.Field

V8.FieldSet

V8.FormMode

V8.FormSubmitAction

V8.FormOutAction

V8.FormOutAfterAction

V8.LoadMode

V8.KeyCode

V8.TableId, V8.TableName

V8.EventName

V8.CurrentToken

V8.TableModel

V8.ThisValue

V8.Tips

V8.CurrentUser

V8.Post

V8.Get

V8.ChineseToPinyan

V8.RefreshTable({ _PageIndex : 1 })

V8.Router.Push

V8.Window.Open

V8.OpenForm(formModel, type)

V8.OpenFormWF(formModel, type)

V8.SelectedData

V8.SearchSet

V8.SearchAppend

V8.AppendSearchChildTable [V8.OpenTableSetWhere is recommended]]

V8.OpenTableSetWhere

V8.IsNull(value)

Parent table on child table

V8.FormSubmit

V8.FormClose

V8.ParentV8

V8.AddSysLog

V8.ReloadForm

V8.HideFormBtn

V8.HideFormTab(tabName)

V8.ShowFormTab(tabName)

V8.ClickFormTab(tabName)

V8.GetFormTabs

V8.ConfirmTips

V8.ShowTableChildHideField

V8.GetChildTableData

V8.CurrentTableData

V8.WF.StartWork

V8.SendSystemMessage

V8.FormWF

V8.Base64

V8.OpenDialog

V8.NewGuid

await V8.NewServerGuid

V8._

V8.ModuleEngine

V8.ApiEngine

V8.DataSourceEngine

V8.OpenAnyForm

V8.OpenAnyTable

Form button anti-duplicate click

V8.ClientType

V8.SysConfig

V8.FormEngine

Mobile End Function

Bluetooth Printing

Two-dimensional code, bar code scan code V8.Method?. ScanCode